![[Tiger 321]](321_1.gif)
|
Option Pack 1 - Turret Mounted Parts This page is under construction, some pictures shown here do not match the text. |
|
) |
Assembling
the elevation brackets and mechanicals. Note that my gun mount has
been modified to allow installation without removing the gun pivot
pins. Vince supplied the brass bushings and the machining plans. |
|
Elevation
motor mounted with additional hardware and limit switches adjusted. |
) |
Looking
into the turret with the drive motor mounted. A standard unmodified
gun mount is installed. Photo courtesy of Philip Blair. |
|
Turret
clamp mounted to the turret with the turret knob fitted. The holes
for the clamps did not line up with the M4 tapped holes in the turret.
These will be plugged with a piece of aluminum rod, drilled to the
correct position and tapped. |