![[Tiger 321]](321_1.gif)
|
Option Pack 1 - Installing Main Motors Fitting the main motors in the hull. |
|
) |
 Assembling
the motor mounts. Note: The front mount is not used if you are installing
the updated collar type mount (hull side mount). |
) |
Earlier
kits received a retrofit to add upgraded motor mounts. This template
was supplied to assist in drilling the additional holes in the hull. |
) |
Fit
the upgraded motor mounts to the hull. |
 |
Install
the motors by first inserting the small gear through the motor mount
and through the lower hull. It should engage the main drive gear.
Mount the motor mounts to the hull floor using M5 * 12 cap head screws.
It is recommended that M5 washers be added or better yet, motor mounting
plates from Vince. |