| Building
the Wheels - Final Assembly (Packs 5, 6, 7, and 8) |
 |
Assembly of spacer/end cap. Packs 5 and 7 (left in image) use the
small End Cap (CE0211) and a M4 * 8 Cap Head screw. Packs 6 and 8
(right) use Spacer B (CE0215) and a M4 * 16 Cap Head screw. Note that
Spacer B should have the thin raised boss facing the bearing. |
 |
The
Packs 5 & 7 road wheels assembled with Armortek parts. |
 |
The
Packs 6 & 8 road wheels assembled with Armortek parts. |
 |
I used two cans of primer for the 32 wheels. Each wheel was glass
beaded before painting. An unusually warm day in late February allowed
me to paint outside. |
 |
There are two different types of hub caps, one is taller than the
other. These are mounted to only the two outer rows of road wheels.
The one on the left is for the double-tire wheel and is the shorter
of the two. The right one is for the single tire road wheel and is
taller. |
| Information
on enhancing the detail of the road wheels can be found here. |
![[Tiger 321]](321_1.gif)
)
)
)
)
)